We guarantee timeliness and precision with our Water jet cutting for marble and stone
Waterjet excels at cutting and mitering ultra-hard stone materials that are too hard to cut with conventional saws.
Waterjet technology cuts without heat or distortion by using an ultra-high pressure stream of water mixed with abrasive which cuts through the hardest material in almost any thickness:
- thick granite, marble, slate, limestone, soapstone, travertine, engineered stone
- any other material for floors and counters
Waterjet technology is the most efficient answer for cutting and mitering stone because it increases material yield and operating efficiency and reduces costs compared to conventional equipment such as saws.
Did you know that most of the interior designers who created the intricate patterns and inlays in the hotels on the strip in Las Vegas prefer waterjet? This is because you can also get accurate lines and details.
Whatever the material or thickness we can cut it!
See the other materials we can cut and learn more about how waterjet cutting works here.
Stone Cutting Comparisons
|Cuts non-metallic materials||Yes||No||No|
|Capable of multi-head cutting applications||Yes||No||Limited|
|Easily cuts composites||Yes||No||No|
|Causes material hardening||No||Yes||Yes|
|Causes burr formation||None or minimal||Yes||Yes|
|Requires re-working||None or minimal||Yes||Yes|
|Loss of material||None or minimal||High||Yes|
|Tightest tolerances||.004" - .011" (0.1 - 0.3mm)||.004" (0.1mm)||.008" - .019" (0.2 - 0.5mm)|
|Creates hazardous vapors||No||Yes||Yes|
|Maximum material thickness's cut||Up to 12" (305mm)||< .98" (25mm)||< 3.15" (80mm)|
|Causes warping/deformation to material||No||Yes||Yes|